You can love and appreciate your trees, but sooner or later there comes a time when you leave the chainsaw and get to work for. Especially if there are branches overhanging the street, public sidewalk, street or block the signals, then in most cities there are rules about how much space is needed. It 'important that you not against these rules are put in place for good reason - to avoid hazards and safe for people. So at least some cuttingare obliged to require at any stage of their life.
Trimming a tree can usually be done with one or more of the right tools that are designed for the job. A pair of hand shears are ideal for easy cutting, while the leaves are good and sharp, but they are not on branches or logs larger than about one centimeter in diameter, maximum work, would not be easy to manage. Loppers are like long stems with loppers, and are easy to deal with these larger branches, butonce again have to be sharp. A pruning saw can be used for very large branches are cut, but here we enter into a chainsaw alone. A powerful chainsaw well cared for their hard work and time is to take the job and make life much easier. Some people shun the idea of using one of these machines, but until you take some simple precautions and common sense there is no fear from them. There are also some tools that mounted rodAnd 'possible to reach higher levels easier and the cutting of the tree. Of course it goes without saying that the safety equipment and clothing, regardless of the work you are doing, or use the appropriate tool should be used.
If you can avoid it, it is better not to top a tree. Toppings can be a very dangerous practice and should not be done unless absolutely necessary, for example, if you need a point of view of safety. Bring a lot of stress on the treeand may actually be more dangerous than leaving it to grow to its natural level. Or the judge sets a tree because you are afraid that it may be counterproductive. Trees that will be hard to overcome losing between 50-100% of their leaves, and this in turn can temporarily put into starvation mode. If this happens, the tree may begin to shoot around the cuts in some species grow up to 20 meters in a year, in an attempt to produce new leaves as quickly as possible. ShouldHe also mentioned that if a tree is stressed and weak, tend to be ill, suffering from infestations of insects, which can lead to death of the tree. The wounds, in which the cuts were made, are an easy target for diseases and insects on the tree and the trees that are already above that are most likely to have weakened.
So if your tree is starting to look a bit 'dangerous, then it might be easier and safer to get out that chainsawand just everything to the ground. That is, if there are other alternatives, and you need a single tree is high, it is worthwhile to consider hiring a professional to do it for you as they know the right tree dressing techniques. Topping a tree is very similar to an operation (albeit with a chainsaw), and I'm sure that as soon as someone is working on the operating table! These people can work with less damage to the tree to do as much as possible and leave with the best opportunitiesTo grow, survive another day. Sometimes it is best to get the professionals
0 comments:
Post a Comment